Difference between revisions of "Frame Designs"
(→Goals) |
|||
| Line 3: | Line 3: | ||
Load cell mounting: Frame, rails, mounting plate | Load cell mounting: Frame, rails, mounting plate | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
==Designs== | ==Designs== | ||
| Line 44: | Line 28: | ||
</gallery> | </gallery> | ||
| + | |||
| + | |||
| + | |||
| + | ==Goals== | ||
| + | |||
| + | *durable (won't rust, rot, or become brittle) | ||
| + | *doesn't compromise accuracy | ||
| + | *low cost | ||
| + | *light weight | ||
| + | *overload limit | ||
| + | *protect load cells from uneven heating | ||
| + | *enclose electronics and conceal or protect wires. | ||
| + | *works with screened bottom boards | ||
| + | *works with 8 or 10 frame supers | ||
| + | |||
| + | Probably two different designs: | ||
| + | #A low cost load cell mounting system for 1, 2 or 4 load cells for a mass produced consumer product. | ||
| + | #A load cell mounting system that can be built from readily available materials by students using tools found in a home shop. | ||
| + | #A high performance scale for serious research. | ||
Revision as of 19:33, 25 March 2017
Scale Designs
Load cell mounting: Frame, rails, mounting plate
Designs
Many interesting and innovative designs have been suggested, built and tested. Each have advantages and disadvantages:
- Punched and bent
- Welded Steel Rectangular Tubing
- Progressive die stamped and welded
- 3D printed corner brackets/metal tubing
- Frameless (2 rails) using strut
- Octanorm aluminum extrusion with torx cam locks
- Vacuum Forming: A Plastic/Aluminum Hybrid Frame
- Ultimate Bottom Board: Utilizing a Manufactured Frame with Aluminum Undercarrage
- Thrifty-Bee Scale: A Low-Cost All Aluminum Scale
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
Goals
- durable (won't rust, rot, or become brittle)
- doesn't compromise accuracy
- low cost
- light weight
- overload limit
- protect load cells from uneven heating
- enclose electronics and conceal or protect wires.
- works with screened bottom boards
- works with 8 or 10 frame supers
Probably two different designs:
- A low cost load cell mounting system for 1, 2 or 4 load cells for a mass produced consumer product.
- A load cell mounting system that can be built from readily available materials by students using tools found in a home shop.
- A high performance scale for serious research.
