Difference between revisions of "User:David"
| Line 69: | Line 69: | ||
File:LUX-7.JPG|Use electrical tape to reattach dome to bulb body|alt=alt language | File:LUX-7.JPG|Use electrical tape to reattach dome to bulb body|alt=alt language | ||
File:LUX-8.JPG|Secure using electrical tape to 3/4' PVC pipe|alt=alt language | File:LUX-8.JPG|Secure using electrical tape to 3/4' PVC pipe|alt=alt language | ||
| + | </gallery> | ||
| + | <br> | ||
| + | '''Solution to Overheating Hot Spot'''<br> | ||
| + | If you are in areas of extreme heat during the summertime like I am, you may have problems with your equipment overheating. Fortunately the only gadget I was having problems with was the AT&T Velocity Hotspot. After tossing around a few ideas, inclusive of a super mini refrigerator I decided on using a CPU radiator/fax setup as a cooling option. You will undoubtedly have to have an exterior container to take advantage of this option.<br> | ||
| + | <gallery> | ||
| + | File:FAN-1.JPG|Solder wires to Lux Sensor|alt=alt language | ||
| + | File:FAN-2.JPG|Secure Lux Sensor to bulb base|alt=alt language | ||
| + | File:FAN-3.JPG|Use electrical tape to reattach dome to bulb body|alt=alt language | ||
| + | File:FAN-4.JPG|Secure using electrical tape to 3/4' PVC pipe|alt=alt language | ||
</gallery> | </gallery> | ||
Revision as of 23:34, 19 December 2016
INTRODUCTION:
My name is David Hawa, I am hobbyist beekeeper in Texas and have been keeping bees since 2012. The HawaUbee Apiary is registered with the State of Texas (#1-439-701) and is located in Roanoke Texas at Henrietta Creek Apple Orchard. The orchard which has been in operation since 1990, hosts field trips to thousands of children annually teaching them about pollinators and pollinator habitats. Currently the apiary has two monitored beehives, the first Named: HawaUbee which utilizes an older version of HiveTool and is a 10 frame Langstroth style hive. The HawaUbee hive is a participant in the NASA pollination project; the first of its kind in Texas. The second, more recent hive named HawaUbee02 is equipped with the new user friendly HiveTool setup (HiveTool 0.7.3)and monitors not only weight but internal hive temperature, external temperature, and sunlight patterns. The HawaUbee02 beehive is an 8 frame Flow Hive with dual brood boxes. My development scale is Named: HawaUbee03 which resides on my desk and it serves as my tinkering system. At the end of 2016 I currently have ten, ten-frame Langstroth beehives and I manage 5 Flow Hives that are owned by the orchard. I am amazed how far this project has come and excited to see where it is going!
The HawaUbee webpage is located at HawaUbee.com
Pictured below the HawaUbee Apiary at the close of 2016:
SYSTEM
Overview - The HawaUbee Hivetool System is totally off the grid; it is powered by two 185W; 5.17AMP solar panels which charge Three 35AMP hour batteries and is wired with an inline fuse incase anything goes haywire. Each scale is run by separate raspberry Pi computer systems contained in individual Pellican water-tight storage boxes. The entire system is enclosed in a small outdoor storage shed which is anchored to the ground to prevent tipping. The scales under HawaUbee and HawaUbee02 are constructed out of stainless steel "L" angle. Wires from the load cells are run into a watertight junction box and then are run through a protective conduit and connect to the Pi computer systems. Both Pi systems have wireless USB dongles that connect to an AT&T velocity hotspot. Below are pictures of some milestones for both HawaUbee and HawaUbee02 HiveTool Scales
HiveTool Scale: HawaUbee
- Error creating thumbnail: File missing
Stainless Steel Scale with Load Cells
- Error creating thumbnail: File missing
Testing the Scale with Weights
- Error creating thumbnail: File missing
Leveling and Installation of the Scale
- Error creating thumbnail: File missing
Rough Installation of Components
- Error creating thumbnail: File missing
Connection to the Internet Accomplished
- Error creating thumbnail: File missing
HawaUbee Hive Langstroth 10-Frame
- Error creating thumbnail: File missing
Inside the Container
- Error creating thumbnail: File missing
HawaUbee(NASA #TX01)is Complete
HiveTool Scale: HawaUbee02
- Error creating thumbnail: File missing
Stainless Steel Scale with load cells
- Error creating thumbnail: File missing
HiveTool Development Board Components
- Error creating thumbnail: File missing
Soldering Components
- Error creating thumbnail: File missing
HawaUbee02 powered by battery
- Error creating thumbnail: File missing
Preparing to install the scale
- Error creating thumbnail: File missing
Installing HawaUbee02 Computer
- Error creating thumbnail: File missing
Construction of Light Sensor
- Error creating thumbnail: File missing
Final Installation of HawaUbee02 Under a Flow Hive
Parts List
Upcoming
Soldering/Construction Manual
If you have decided to assemble your own board below is a manual to aide in the assembly of your HiveTool v0.3 board.
File:HiveToolV0.3Board - Construction.pdf
EZ Connector for the DHT22 (Temperature) Sensor
Soldering the DHT22 is not an easy thing to do, even for the savvy solder-er utilizing a high-end iron and a convenient clamp. I have found a connector/cable combo that will take the headache out of making/repairing/replacing your temperature sensors. The wire leads off the connector are much easier to solder, I even accomplished this in-field with relative ease. This cable can be purchased at Amazon.com for around $6.00 for a quantity of ten.
Search: "'TronicsPros RGB LED Light Strips Female Connector RGB LED Strip Connector Cable" I am going to call the connector the DHT-EZ for the descriptors below.
- Error creating thumbnail: File missing
Picture of the DHT-EZ
- Error creating thumbnail: File missing
DHT22 sensor is inserted into the DHT-EZ
- Error creating thumbnail: File missing
Shrink Tubing Securely attaches the DHT22 to the DHT22-EZ
- Error creating thumbnail: File missing
Leads off the DHT-22EZ are soldered and insulated
Lightbulb Lux Sensor
This is a creative play off of the ping pong ball setup of the Sensi of Sensors, Adrian Ogden. This model utilizes a carefully disassembled 60W Sylvania LED light bulb. I probably should have included a desiccant in the construction of this which should be considered in future models. Take note of the clear piece of plastic that I added between the back of the sensor and the metal piece on the light bulb (pictured below).
- Error creating thumbnail: File missing
Sylvania 60W LED Bulbs
- Error creating thumbnail: File missing
Bulb and Lux Sensor
- Error creating thumbnail: File missing
Dome removed from bulb base (wear gloves)
- Error creating thumbnail: File missing
Removal of LEDs,*Installation of Plastic Insulator* and Notch bulb body for wire
- Error creating thumbnail: File missing
Solder wires to Lux Sensor
- Error creating thumbnail: File missing
Secure Lux Sensor to bulb base
- Error creating thumbnail: File missing
Use electrical tape to reattach dome to bulb body
- Error creating thumbnail: File missing
Secure using electrical tape to 3/4' PVC pipe
Solution to Overheating Hot Spot
If you are in areas of extreme heat during the summertime like I am, you may have problems with your equipment overheating. Fortunately the only gadget I was having problems with was the AT&T Velocity Hotspot. After tossing around a few ideas, inclusive of a super mini refrigerator I decided on using a CPU radiator/fax setup as a cooling option. You will undoubtedly have to have an exterior container to take advantage of this option.
- FAN-1.JPG
Solder wires to Lux Sensor
- Error creating thumbnail: File missing
Secure Lux Sensor to bulb base
- Error creating thumbnail: File missing
Use electrical tape to reattach dome to bulb body
- Error creating thumbnail: File missing
Secure using electrical tape to 3/4' PVC pipe
