Sensors: BME680
BME680
Download the drivers
git clone https://github.com/BoschSensortec/BME680_driver.git git clone https://github.com/twartzek/bme680-raspberry.git
Compile
gcc bme680_main.c bme680.c -o bme680
Wiring Adafruit
Note that this pin out is only for the Hive Interface boards ver 1.0. The wiring will be slightly different for the ver 0.3 boards and earlier.
| H2 I2C Bus ver 1.0 | Adafruit break out board | |
|---|---|---|
| Pin | Signal | BME680 |
| 1 | +3.3 | VIN |
| 2 | I2C | SDI |
| 3 | I2C | SCK |
| 4 | NC | |
| 5 | Ground | GND |
Test
./bme680 **** BME680 start measurements **** 2018-07-05 13:27:40 T: 25.14 degC, P: 942.12 hPa, H: 74.29 %rH, G: 8029 Ohms 2018-07-05 13:27:43 T: 25.13 degC, P: 942.12 hPa, H: 74.29 %rH, G: 9043 Ohms 2018-07-05 13:27:46 T: 25.11 degC, P: 942.10 hPa, H: 74.38 %rH, G: 9976 Ohms **** Measurement finished ****
