Hardware: Hive Interface Board 0.3

From HiveTool
Revision as of 04:11, 20 November 2015 by Paul (talk | contribs)
Jump to: navigation, search
New Dev Kit PCB

New Developers Kit hardware for the Raspberry Pi platform is undergoing final testing.

This is an interim solution - a step towards the goal of a complete turnkey system.


Features:

  • Plug and Play - all the sensors plug in.
  • 12 VDC power supply with battery voltage monitoring
  • Supports
    • HX711 24 bit ADC and 4 load cells in parallel.
    • two DHT22 temperature/humidity sensors.
    • TSL2591 Lux sensor
    • Rain Gauge


Plug and Play. Telco RJ11 (6P4C) connectors are used for all sensors. These are gold plated, self wiping, inexpensive, readily available, crimp on with an inexpensive crimping tool.

Retrieved from "http://wiki.hivetool.net/index.php?title=Hardware:_Hive_Interface_Board_0.3&oldid=2044"