Hardware: PCB Assembly

Parts

File:PT-JGT(X)(XXX).jpg

Assembly

1. insert the 2x20 female header from the bottom side of the board.
2. Solder the header on the top (component, silk screen) side of the board.
3. Install the following resistors:
   1. R 330
   2. R 1K
   3. R 1K
   4. R 2.2K
   5. R 2.2K
   6. R 200K
4. Install RJ1 and RJ2. Be very careful to check that all the leads are in the holes before you snap it in place.
5. Install 1x4 and 1x6 male header.
6. Install power supply if used.