XXX: Load Hivetool on the Pi

1. Make SD card:

dd bs=4M if=2013-05-25-wheezy-raspbian.img of=/dev/mmcblk0

1. Boot Pi
2. Expand file system, set TZ and hostname

sudo raspi-config

1. Update before trying to add packages

sudo apt-get update

1. Get gawk, bc for shell scripts, apache and libusb.

sudo apt-get install gawk bc apache2 apt-get libusb-dev

1. Get the graphics library

sudo apt-get -y install libgd2-xpm-dev build-essential

1. Now get Graphics for perl. Force the install.

sudo cpan -f GD
sudo cpan GD::Text GD::Graph Date::Format

1. Copy the patched pm

sudo scp -P8022 paul@192.168.254.31:/usr/local/share/perl/5.14.2/GD/Graph/axestype.pm /usr/local/share/perl/5.14.2/GD/Graph/axestype.pm

1. Make hivetool and htdocs directories.

sudo mkdir /home/hivetool
sudo mkdir /var/www/htdocs

1. Copy the hivetool files"

 scp -P8022 pi@192.168.254.31:/home/hivetool/* /home/hivetool
sudo scp -P8022 pi@192.168.254.31:/var/www/htdocs/* /var/www/htdocs
# Done installing hivetool files - now configure apache

1. set static ip for port forwarding

sudo vi /etc/network/interfaces:

iface eth0 inet dhcp

iface eth0 inet static

   address 192.168.254.31
   netmask 255.255.255.0
   gateway 192.168.254.254

WHERE TO SET DNS SERVERS? /etc/network/interfaces /etc/dhcp/dhclient.conf

1. set up apache

sudo vi /etc/apache2/ports.conf Listen 8080

1. 1. add .pl to AddHandler cgi-script

sudo vi /etc/apache2/mods-enabled/mime.conf AddHandler cgi-script .cgi .pl

1. 1. add Includes to Options:

sudo vi /etc/apache2/sites-enabled/000-default

1. 1. Add index.shtml:

sudo vi /etc/apache2/mods-enabled/dir.conf

1. 1. sudo cp /etc/apache2/mods-available/include.load /etc/apache2/mods-enabled/

1. misc

sudo vi /etc/hostname

1. 1. and edit the local host name here, too:

sudo vi /etc/hosts