Hardware: Hive Interface Board 1.0

From HiveTool
Revision as of 03:47, 30 May 2018 by Paul (talk | contribs)
Jump to: navigation, search

Ver 1.0 of the Hive Interface Board. As suggested by the 1.0 designation, this should be the final release of this design.

Features

  • Add Real Time Clock (RTC) support so DS3231 will plug into header H2 without modification.
  • Change 1-Wire connection to Pi's default 1-Wire GPIO pin.
  • Added Chip Enable signal to SPI bus signals on H2.

==