NAPAPi

From HiveTool
Jump to: navigation, search

Click on a photo to enlarge.

  • Raspberry Pi in enclosure.

  • Solid Aluminum Frame and Electronics.

  • Pi and 12 Volt 5A Charge Controller

  • Pi wired to DHT22 Temp / Humidity Sensors

  • Pi, Internal & External Temp / Humidity

  • Load Cells, Phidgets 4 channel signal conditioner

  • Closeup of Zemic load cell mounted on frame.

  • Phidget 4 channel strain gage amplifier and 24 bit ADC.

  • Levelling the Scale Frame

  • Battery charge controller and lead acid battery.

  • 45W 12V Solar Panel with Deep Cycle Battery

  • NAPA-PI Hive in Ogden Apiary

  • Hardware cloth serving as Wi-Fi reflector.

  • Pi Beneath Hive, Scale & Wiring

  • Hive on Load Cell with Rubber Dampener

  • DHT22 Temperature/Humidity Sensor.

Retrieved from "http://wiki.hivetool.net/index.php?title=NAPAPi&oldid=1689"